Tent Pole Accessories

SHOCKCORD FOR TENT POLES

item	size	color	1-24 yds	25-99 yds	100+ yds
#2400	1/8"	black	$ .49	$ .48	$ .47	Qty:
1/8" is most common size shockcord used for all ALUMINUM pole sizes -----------------------------------------------------------------------------------------------------------
#2402	3/32"	black	$ .39	$ .38	$ .37	Qty:
3/32" is most recommended for the nano light poles, when weight is a priority and for all FIBERGLASS poles.

NOTE: yardages more than 15 yds may contains a splice or two and you may want to accommodate for such

Not actual size-its purpose is meant to show perspective changes in sizes

LIGHTWEIGHT TENT STAKES

item	size	1-24	25-99	100+
#4025	6"	$3.50 ea	call	call	Qty:
Classic tent stakes made from quality titanium at any excellent value. Shepard`s Hook stakes. 6" long, only 6 grams each. Ultralight designed for the serious ultralight hiker.

EASTON NANO TENT STAKES

item	size	1-24	25-99	100+
#4096	6"	$3.59 ea	$3.41 ea.	call	Qty:
Made from high strength, lightweight .312" Easton 7075-79 nanolight aluminum. Solid aluminum head and a durable swaged point for optional cord to go through the cap for extra tie-down in severe wind and easy removal from the ground. Each stake only weighs .35 oz (10 grams).

TENT CLIPS (also known as inner tent clips or tent hooks)

item	size	1-24	25-99	100+
#3132	9.5mm	$.60	$.58	$.54	Qty:
They will fit the aluminum poles .340" through .380" outside diameter size and 7 to 9.5 mm fiberglass poles. They accommodate 1" webbing. Offered exclusively through Quest Outfitters.

LINE LOC 3 (tent guy line adjuster buckle)

item	size	1-24	25-99	100+
#3094	1/2"	$.49	$.46	$.39	Qty:
Tent guy line adjuster buckle by ITW Nexus. The tent guy line adjuster, a Ladderloc for cord, creates an easy way to adjust and keep cord taut. It laces and functions just like a standard Ladderloc would on webbing—pull the cord to tighten, lift the ergonomically designed thumb tab to release. For stability, the adjuster is sewn into an application using 13mm webbing. The tent guy line adjuster is designed to accommodate 2.5mm to 3mm cord.

LINELOC - SIDE RELEASE

item	size	1-24	25-99	100+
#3120	1/2"	2.25	2.11	2.07	Qty:
Works like a side release buckle for drawcord. The buckle is attached to your project with 1/2" (13 mm webbing) and the cord can be cinched tight on the other half. The side release action allows you to quickly separate the two halves. The tent guy line adjuster is designed to accommodate 2.5mm to 3mm cord (3/32").

TENT TOGGLES

item	size	1-24	25-99	100+
#3096	1 1/2" x 1/2"	.55	.48	.44	Qty:
2 holes in toggles to pass up to 1/8" cordage through. Many uses including hanging no-see-um or coated fabric to the bottom of your tarp (it is like a button) instead of using zippers or Velcro. New slightly larger size

Pittsburgh 40913 Tubing Cutter

item	size	1-24	25-99	100+
#4200	-	$12.75	N/A	N/A	Qty:
Tent pole tubing cutter. Professional quality cutter handles 1/8" to 1 1/8" diameter aluminum, copper, and brass tubing, and thin walled conduit. Alloy steel cutting wheel. Two facing flare groove roller. Large easy grip feed knob. Die cast frame with reamer. Same durable design as larger cutters, only this one is easily portable because of its smaller size. Micrometer adjuster and flare cut-off groove. Made in Pittsburgh.

NITE SHADE ZIPCORD

item	size	1-24	25-99	100+
#3143	-	$ .41	$ .34	$ .31	Qty:
The ITW Nexus NiteShade Aerohead two piece system incorporates glow-in-the-dark technology. The latch portion of the Aerohead, after exposure to either sunlight or artificial light, will glow for up to six hours. The latch's natural color is opaque white and glow-in-the-dark color is green. Works with 1/8" drawcord (purchased separately).