Misc. Fasteners

           (ALL acetal "plastic" fasteners are BLACK unless otherwise listed)

PLASTIC GROMMETS
		item size 1-24 25-99 100+ #3072 3/8" $ .25 $ .23 $ .20 Qty:  Snaps together-no tools needed
AGLETS w/CAPS (drawcord endcaps)
		item size 1-24 25-99 100+ #3075 - $ .37 $ .33 $ .31  Qty:  Tips to finish off the ends of drawcord.
AGLETS (drawcord endcaps)
		item size 1-24 25-99 100+ #3076 - $ .36 $ .34 $ .32 Qty:  Tips to finish off the ends of drawcord.
LUGGAGE STUDS
		item size 1-24 25-99 100+ #3033 medium $ .43 $ .32 $ .23 Qty:
SHOULDER PADS
	1 1/2"  &  2"              2"	item size 1-24 25-99 100+ #3052 1 1/2" $ .79 $ .68 $ .53 Qty:  #3053 2" $ .88 $ .76 $ .67 Qty: rectangular round
LASHING TABS
		item size 1-24 25-99 100+ #3030 4 slot $ .87 $ .80 $ .72 Qty:  (accommodates 1" wide webbing)
O-RINGS
		item size 1-24 25-99 100+ #3058   1/2" ID $.21 $.17 $.14 Qty:  #3088   7/8" $ .22 $ .18 $ .15 Qty: (size is the measurement of the inside diameter of the rings)
BELT KEEPERS
		item size 1-24 25-99 100+ #3065 1" $.30 $.25 $.21 Qty: #3066 2" $ .39 $ .33 $ .28 Qty:
STERNUM STRAP
		item size 1-24 25-99 100+ #3091 3/4" $ .44 $ .33 $ .30 Qty:
STERNUM SLIDER-DUAL
		item size 1-24 25-99 100+ #3140 1" $ .87 $ .83 $ .76 Qty:  Attaches a 1" sternum strap to a backpack and also offers vertical adjustment.  All slots accommodate 1" webbing
LINELOC 3 (tent guy line adjuster buckle)
		item size 1-24 25-99 100+ #3094 1/2" $ .49 $ .46 $ .39 Qty:  The tent pole adjuster also known as the Lineloc 3 by ITW Nexus.   The tent guy line adjuster, a Ladderloc for cord, creates an easy way to adjust and keep cord taunt. It laces and functions just like a standard Ladderloc would on webbing—pull the cord to tighten, lift the ergonomically designed thumb tab to release. For stability, the adjuster is sewn into an application using 1/2" (13mm) webbing. The tent guy line adjuster is designed to accommodate 2.5mm to 3mm cord (3/32").
LINELOC - SIDE RELEASE
		item size 1-24 25-99 100+ #3120 1/2" $2.15 $2.01 $1.97 Qty:  Works like a side release buckle for drawcord.  The buckle is attached to your project with 1/2" (13 mm webbing)   and the cord can be cinched tight on the other half.  The side release action allows you to quickly separate the two halves.  The tent guy line adjuster is designed to accommodate 2.5mm to 3mm cord (3/32").
TENT CLIPS (also known as inner tent clips or tent hooks)
		item size 1-24 25-99 100+ #3132 9.5 mm $ .60 $.58 $ .54 Qty:  They will fit the aluminum poles .340" through .380" outside diameter size and 7 to 9.5 mm fiberglass poles.  They accommodate 1" webbing. Offered exclusively through Quest Outfitters.
TENT TOGGLES
		item size 1-24 25-99 100+ #3096 1 1/2" x 1/2" $ .55 $.48 $ .44 Qty:  2 holes in toggles to pass up to 1/8" cordage through.  Many uses including hanging no-see-um or coated fabric to the bottom of your tarp (it is like a button) instead of using zippers or velcro.                                      New slightly larger size
ZIPPER CORD
		item size 1-24 25-99 100+ #3056 - $ .24 $ .22 $ .19 Qty:  Designed to make zipper sliders much easier to handle.  Snaps together pinching 1/8" drawcord (purchased separately) in between the two halves
NITE SHADE ZIPPER CORD -  IT GLOWS IN THE DARK
		item size 1-24 25-99 100+ #3143 - $ .41 $ .34 $ .31 Qty:  The ITW Nexus NiteShade Aerohead two piece system incorporates glow-in-the-dark technology. The latch portion of the Aerohead, after exposure to either sunlight or artificial light, will glow for up to six hours. The latch's natural color is opaque white and glow-in-the-dark color is green.  Works with 1/16" drawcord, purchased separately (3/32" and larger does not work).
CLASH HOOK BUCKLES  made of carbon steel
		item size 1-24 25-99 100+ #3247 1" $ 3.95 $3.62 $3.40 Qty:  The C.L.A.S.H. Hook [Conventonal Latch Attachment Snap Hook] was designed to meet the needs of sling and strap applications that require a quick-on feature with spring loaded retention gate. The body is made from one solid steel stamping and has a slot designed to accept 1” webbing for weapon slings. If your application demands an all metal heavy tensile load system, C.L.A.S.H. Hook is the easy choice. - Low profile - One-piece stamped body - High load bearing rating - Spring loaded retention gate.
HOG RINGS
		item size 1-24 25-99 100+ #3222 - $ .10 $ .09 $ .08 Qty:  used for joining two pieces of shockcord
GAITER HOOKS
		item size 1-24 25-99 100+ #3202 - $ .50 $ .45 $ .42 Qty:  fits 3/4" webbing, sew-on.  New design
PLASTIC SNAPS- SEW ON
		item size 1-24 25-99 100+ #3102 1/4" $2.39 N/A N/A Qty:  Sew-on, lightweight.   They have a real positive snap action- they stay closed.  Also, washable, dry-cleanable and non-rust. 12 snaps per pkg